INTRODUCTION
Ring die pelleting machine is a small granular processing machine, which is widely used in organic fertilizer granulation and feed granulation production. The cylindrical hard granules produced by the ring-die pelleting machine are easy to store and transport, slow release of fertilizer efficiency in the soil, and keep granules under water for a long time for fish to eat. Therefore, the ring die pellet mill is an important granulating equipment in the fertilizer and feed industry. It can be used as both organic fertilizer granule machine and feed press.
Use range :
Ring die granulator machine widely used in large medium and small aquaculture,grain and feed processing plants,livestock farms,individual farmers and small and medium-sized farms,farmers or large ,medium and small feed processing plants.
FEATURES
1.The machine is mainly used for pellet processing of (bio) organic fertilizer, compound fertilizer and aquaculture processing industry.
2.The granular material processed by this machine has a smooth surface, moderate hardness, low temperature rise in the processing process and can keep the nutrients inside the raw material better. The mixer and the granulation machine are three in one. At the same time, the material is stirred second times at the same time, and the feeder is equipped with the governor and in the production. According to the material dry and humidity adjusting feed quantity, the main engine is not stuck or useless. The main unit integrates the modules, which is equivalent to the work of granulating machines.
3.The size of the particles is uniform and the shape is neat.
4.Due to the low moisture content of particles, it is easy to store, and it can remain in the water for a long time and improve the utilization rate of materials greatly.
The mould of the granulator, mixing and conveying blades are quenched and tempered with corrosion resistant stainless steel. The roller is cast with manganese and quenched and tempered to achieve corrosion resistance and wear resistance. Thus, the output will be increased and the loss of the equipment is reduced.
